News About  

Steam economiser aids biomass power plant’s environmental performance

12/04/2017 11:30:10
Download Text
ImagesClick Image for 300dpi jpg fileSteam economiser aids biomass power plant’s environmental performance

A&J Fabtech is to supply a bespoke economiser and heat exchanger to a new waste wood biomass power generation plant which, when built, will be the biggest such facility in the UK.

Now under construction at the entrance to the Manchester Ship Canal at Ince Park in Cheshire, A&J Fabtech worked closely with the designers of the overall facility and delivered the economiser to site as one of the earliest stages of the project.

Once on-stream the biomass plant, which is expected to cost £100m to build, will produce over 42 MWe of power and have a life expectancy of at least 20 years. It will burn nearly 200,000 tonnes of used but unrecyclable wood a year and power the equivalent of 40,000 homes, or the combined populations of major Cheshire towns Chester and Nantwich. It will produce 65,000 tonnes of carbon dioxide less than an equivalent coal fired power station, which is comparable to taking 50,000 cars off the road.

Other benefits of the project include employment creation (initial construction and long term operational jobs, plus acting as the stimulus for the development of a wider economy), reduction in waste disposal requirements and general pollution, as well as environmental and biodiversity improvements.

The Ince Park economiser is to be built to a 140 tonne, three-part design and will be installed at the back of the main boiler, functioning to convert water to steam through a series of finned tubes. Its main purpose will be to recover heat that would otherwise be wasted so that it can be put to productive use.

A&J Fabtech is the UK’s largest manufacturer of bespoke economisers and heat exchangers. It can design and manufacture units for a wide variety of applications and duties, with experience working on projects as diverse as energy from waste sites like Ince Park, coal fired power stations, gas fired boilers and sludge incineration facilities. It has built units as big as 500 MW and small enough to be packaged with standard boilers.

Andrew Shedden, A&J Fabtech’s Head of Sales & Commercial, explains that supply options range from complete units complete with casings and headers, to loose coils, supports and headers.

“The latter option is typically for larger units that have to be built up on site,” he says. “The choice of heat recovery surface and materials of construction is always carefully selected to suit the fuel and operating environment of each project. This may be plain tube, cast iron, spiral fin, aluminium fin or welded gill.”

Typical materials of construction include carbon steels, alloys, ferritic and austenitic stainless steel. A&J Fabtech maintains a policy by which critical materials such as the base tube are only ever sourced from Western European suppliers, while all finning is carried out within the EU.

The development of the Ince Park area will also include a new port facility on the east bank of the Manchester Ship Canal and a new rail terminal. The 19-turbine, 50 MW Frodsham wind farm is to be constructed alongside the biomass plant. Further, the nearby University of Chester’s Thornton Science Park is expected to also increase industry investment in the site and create high-skill employment opportunities.

Photo Caption:-

Pic 1:- A&J Fabtech is the UK’s largest manufacturer of bespoke economisers and heat exchangers.

“The image(s) distributed with this press release may only be used to accompany this copy, and are subject to copyright. Please contact DMA Europa if you wish to license the image for further use.”

About A & J Fabtech Ltd

A&J Fabtech Water Division offers a dedicated team of experienced individuals who provide the capability to design, manufacture and install a wide range of standardised and bespoke products for the water treatment industry, in addition to working with customers to problem solve on existing plant. At every stage the team is focused on engineering the best possible solutions to ensure that equipment evolves to become increasingly cost effective and efficient in service.

A&J is one of only a few UK based companies that not only design and manufactures a range of scraping equipment in-house but also has the capacity to meet the needs of the water industry and current legislation BSEN 1090, not just on rotating half bridges but on a full range of rotary scrapers and thickeners for both dirty and clean water applications. The company is also a registered supplier on the UVDB database and is UVDB Verify accredited.

Editor Contact

DMA Europa Ltd : Selina Price
Tel: +44 (0)1562 751436 Fax: +44 (0)1562 748315

Company Contact

A&J Fabtech Ltd : Mark Wright
Tel: +44 (0)1924 439614 Fax: +44 (0)1924 456536

  [ Back ]  
About the DMA Group Click to Read More