News About  
 

The effects of CE marking on modern construction

29/06/2017 17:15:03
 
 
Download Text
English
ImagesClick Image for 300dpi jpg fileThe effects of CE marking on modern construction

Since its introduction in 2014, CE Marking for steel fabricated products has been the defining standard in assessing the quality, suitability and safety of steelwork. While the benefits of optimum steel products for structural applications may seem obvious, what has the overall effect on the construction industry been during this time period?

Greg North, Director at Barnshaws Section Benders, which is certified to CE Marking Execution Class 4, explores the benefits the standard has provided to construction.

The European Standard BS EN 1090 states that all steelwork supplied in the UK and Republic of Ireland must display the CE mark as a legal requirement, which denotes the suitability and quality of fabrications for use in specific structures. The CE mark is split into four distinct application categories known as Execution Classes.

Class 1 structural steel is suitable for farm buildings in uninhabited areas; Class 2 is majority of buildings constructed in the UK up to 15 storeys; Class 3 is specialised for bridges and stadia and Class 4 covers complex bridges and high risk sites such as nuclear power plants. Each class pertains to the potential risk of the structure if failure were to occur. The classes are decided by a number of factors. Production Category assesses the complexity of the steel fabrication, Consequence Class incorporates potential risk while Service Category evaluates the structural stresses exerted on the steelwork in application.

The effect of this is that steelwork must now be proven to be suitable for a particular application. While it may be obvious that using inferior quality steel fabrications in a bridge building project is unwise, it is also very important to select optimum steelwork that will provide the required performance in application. By selecting appropriately CE marked steelwork, construction companies can have increased confidence that steelwork will offer extended service life and performance. Furthermore, users are able to differentiate the levels of expertise from each supplier, allowing them to select an appropriate fabricator for each project with increased assurance.

All curved steel used in construction is required to be CE marked because of mechanical property changes during forming. Barnshaw Section Benders can CE mark curved steel to Execution Class 4 so quality is ensured for fabricators.

Choosing a highly optimised section can also serve to reduce weight and save space over an entire structure – which can be highly profitable for contractors. By eliminating the risks associated with over or under specified steelwork, construction companies can place increased confidence in the suitability and efficiency of a structure. By defining the Execution Class before fabrication begins, suppliers can also enact specialised production procedures to suit the demands of the application, offering a linear and cost effective workflow.

Achieving the production of fabricated steelwork to CE standards requires businesses to enact a total Factory Production Control (FPC) methodology. This involves keeping track of equipment used in fabrication, quality of welding and the grade of the steel utilised. In addition, total traceability is required from initial source to the final delivery on site. Processes require third party approval and certification, which at Barnshaws, is conducted by SCCS (Steel Construction Certification Scheme). Certification is conducted annually, which if achieved, ensures every steel product requiring CE marking is supplied with an independently ratified Declaration of Performance and an accompanying FPC Certificate.

Such practice has served to standardise levels of production in steel fabrication. While for many premium suppliers, very little amendment will have been carried out to existing processes, inferior suppliers will have been forced to conform or cease supplying steel. As a result, the general standard of fabrication in the steel construction industry has improved.

Furthermore, total traceability has allowed users to examine every step of the production life cycle for steelwork. Therefore, contractors can be sure of a dependable product, as it has been proven to be manufactured exactly to the specifications outlined by the applicable execution class and project brief. With approval from a third party regulatory organisation and relevant certification to reinforce this, the performance and reliability of the steel fabrication is assured.

The effect of CE marking on the construction industry is an increased confidence in the quality of structural steelwork. With third party certification, project contractors can be sure the fabrications utilised in construction work are optimised to the exact application. Therefore, steel fabricators have a clear mandate at the start of every project, while contractors can maximise the potential of structures within the structural tolerances of the steelwork specified. In addition, the introduction of mandatory Factory Production Control has raised standards in the steel fabrication sector, promoting businesses who aim to provide exemplary products.

However, the most important effect is the reduction of potential risk regarding steel structures. Improved confidence in the quality of steelwork translates to safer and more reliable structures, ensuring that every type of structure has complete integrity and suitability for its application.

Photo Caption: The European Standard BS EN 1090 states that all steelwork supplied in the UK and Republic of Ireland must display the CE mark as a legal requirement, which denotes the suitability and quality of fabrications for use in specific structures.

About Barnshaws

Established in 1969, Barnshaws has grown to become the world’s premier specialist profile bending company; supplying market sectors such as construction, power generation, mining, transport and general manufacturing with shaped beams, tubes, plate and other profile section materials. More recent developments have seen the company’s engineering expertise expand from mostly steel to non-ferrous materials including copper and aluminium as well as specialist materials such as Hardox.

Barnshaws has ISO 9001- 2008 approval and was Europe’s first bending company to achieve CE Marking of curved sections to Execution class 4, the highest standard available.

With facilities in the West Midlands, Manchester, Hamilton and Poland, Barnshaws can provide precision metal bending and profile cutting services, locally, nationally and internationally.

Equipped with the largest capacity bending machines in the world, Barnshaws can deliver curved sections up to 35 meters in length with the capacity to bend tubes and pipes up to 1,524mm outside diameter. In addition, the largest range of press brakes in the UK can accommodate materials up to 12 meters in length and form sections from materials with up to 80mm thickness.

The image(s) distributed with this press release may only be used to accompany this copy, and are subject to copyright. Please contact DMA Europa if you wish to license the image for further use.

Editor Contact

DMA Europa : Alan Hatch
Tel: +44 (0)1562 751436 Fax: +44 (0)1562 748315
Web: www.dmaeuropa.com
Email: alan@dmaeuropa.com

Company Contact

Barnshaws Steel Bending Group : Matthew Pritchard
Tel: 0121 557 8261 Fax:
Web: www.barnshaws.com
Email: matthew.pritchard@barnshaws.com

 
  [ Back ]  
About the DMA Group Click to Read More