BURKERT159
23 January 2012
Burkert’s new AirLINE Quick offers a reliable, compact and time-saving solution for the direct mounting of Burkert’s type 8640 valve islands and AirLINE 8644 automation system into control cabinets, eliminating the need for bulkhead connections and internal piping.
|
Burkert153
04 January 2012
Burkert UK has expanded its range of products for providing complete process solutions in the food, pharmaceutical, bio-technology, medical and water treatment sectors (et al), with the introduction of a range of 2/2 stainless steel ball valves
|
BURKERT120
19 December 2011
There are a number of important considerations in the optimised design for a pharmaceutical production process; the selection of valves being not least amongst them. The importance of correct valve selection is evidenced by the benefits it provides.
|
BURKERT166
28 November 2011
Burkert UK is extending the scope of its recent free Hygienic Processing Training courses, with a series of mobile clinics that are dedicated to customer specific issues in Hygienic Processing.
|
BURKERT158
21 November 2011
Burkert has analysed the problems and weaknesses of conventional general purpose steam control valves, and has used the resulting data to design a valve that offers market leading process capabilities.
|
BURKERT169
14 November 2011
The systems engineering team at fluid control specialist Burkert based in Stroud Gloucestershire has helped complete the evolution of a traditional organic craft brewery into a truly holistic microbrewery. This movie documents the change from making beer by hand, to making the same beer using a more automated and thoroughly modern process, one that preserves all the best aspects of the traditional brewing process, just with better control, a higher output and less stress.
|
BURKERT145
25 October 2011
There are so many different flow measurement solutions on the market today that discussing all the possible options is an impossible task. However, as with all technologies, some designs of flowmeter are more widely used than others.
|
BURKERT140
14 September 2011
Burkert’s new 8681 control head has been developed specially for use with pneumatically controlled hygienic process valves in decentralised automation applications.
|
BURKERT160
13 September 2011
Rust, corrosion, dirt, flaking paint, water ingress and external integrity impaired by aggressive products, would all be high up on any process engineer’s list of typical application problems for valves in the food and beverage industries.
|
BURKERT159
13 September 2011
Burkert’s new AirLINE Quick offers a reliable, compact and time-saving solution for the direct mounting of Burkert’s type 8640 valve islands and AirLINE 8644 automation system into control cabinets, eliminating the need for bulkhead connections and internal piping.
|
BURKERT154
13 September 2011
Bürkert’s new TwinPower actuation technology has solved the problem of making solenoid valves considerably more compact, while retaining the same power output. Compact, powerful, and energy-efficient, TwinPower actuation technology increases power density in solenoid valves by means of two coils.
|
BURKERT152
23 August 2011
Bürkert is addressing the problems of skills shortages, sustainability and environmental and regulatory compliance in process markets, by introducing a second series of training courses dealing with the critical subject of Hygienic Processing.
|
BURKERT149
09 August 2011
Steam sterilisation is the standard method used in most laboratories and hospitals for sterilisation of medical instruments, surgical garments and dressing materials.
|
BURKERT150
01 August 2011
Global fluid control specialist, Burkert is supporting the new Sensors + Systems show (formerly Instrumentation) held at Farnborough on September 14th & 15th September 2011, with participation both as an exhibitor, showing the innovative ELEMENT range of hygienic and process control products.
|
BURKERT148
25 July 2011
Bürkert Fluid Control Systems has expanded its ELEMENT modular stainless steel range of products for total solutions in process measurement and control, with new Type 8026, 8036 and 8076 digital flow transmitters.
|
BURKERT130
05 July 2011
Burkert globe valves equipped with Top Control positioners are providing precise control of water height on a prestigious new water feature currently being commissioned in the centre of Copenhagen.
|
BURKERT141
22 June 2011
The Institute for Materials Engineering (IWT) in Bremen, Germany, is engaged intensively with the hardening of steel using the Nitrogen-Methanol Process as an alternative to gas carburising with endogas.
|
BURKERT142
13 June 2011
Cleaning in Place (CIP) has been around for approximately 50 years, and is commonly used in hygiene critical industries, such Food, Beverage and Pharmaceutical, to clean a wide range of plant.
|
BURKERT147
07 June 2011
At The GIFA – The Bright World of Metals exhibition, held in Dusseldorf from 28th June to 2nd July 2011, Burkert is showing (in Hall 10, stand 10A70), its latest advances in modular valve and sensor technologies for improving diecasting applications.
|
BURKERT135
03 May 2011
Bürkert’s BBS alliance for process optimisation has produced the QuickCONNECT, the ideal connection method for biotechnology and pharmaceutical process applications.
|
BURKERT139
18 April 2011
Burkert’s new extended range of ‘Element’ process control components for food, hygienic processing and aggressive media transfer applications is proving that ultimate sensitivity is still a best seller.
|
BURKERT123
13 April 2011
Burkert’s new type 8619 multiCELL transmitter/controllers are designed to cut processing costs in water treatment and hygienic processing applications, providing one device for the direct connection of a wide range of sensors to measure parameters such as flow rate, pH, ORP, temperature and conductivity.
|
BURKERT127
22 March 2011
Converting a manual CIP process to automatic across 80 reaction vessels, using pressure transmitters, condition sensors and flow meters, has enabled Burkert to achieve savings of £120,000 per annum for a major UK pharmaceutical manufacturer.
|
BURKERT114
16 March 2011
Bürkert has extended its BBS range of stainless steel products for hygienic processing applications in food, pharmaceuticals and biotechnology, with the introduction of a new range of PFA-lined stainless steel diaphragm valves for use with aggressive chemicals.
|
BURKERT52
12 February 2011
Burkert’s Type 2080 2/2-way valve integrates a PTFE bellows for fluid separation in hygienic processing applications. Constructed from stainless steel, the FDA-approved Type 2080 offers long operating life with neutral to aggressive gases and liquids.
|
BURKERT110
26 January 2011
Burkert’s Ultrasonic Level Transmitter Type 8175 provides continuous level measurement at distances up to 10-metres. Integrating an ultrasonic sensor and a transducer with a large 8-digit multi-language display in a splash-proof IP65 or immersion-proof IP67 housing, the Type 8175 offers users a teach-In function for easy commissioning, and also delivers low total cost of ownership.
|
BURKERT109
21 December 2010
Companies operating in the competitive global market for food and beverage additives, such as concentrates and flavours, have to ensure that their production processes are not only safe and hygienic but also as efficient as possible.
|
BURKERT122
08 December 2010
Burkert is underlining the importance of steam engineering and condensate management to its fluid control systems solutions, by offering a series of free one-day and three-day educational training courses.
|
BURKERT118
09 November 2010
Burkert’s Type 8611 universal controller for flow, pressure and temperature, cuts OEM system costs substantially, by controlling both proportional and process valves across a wide range of gases and liquids.
|
BURKERT115
04 November 2010
Bürkert’s new stainless steel 2000 INOX angle seat valve is designed to control a wide range of media - including water, alcohols, oils, steam and air - at temperatures up to +180 degrees C.
|
BURKERT101
26 October 2010
Burkert’s new Type 6650 miniature solenoid valve, with its patented flipper technology, has proved to be a winner for KBioscience, a dynamic British life sciences company that has developed its own machine, the Meridian, to provide improved performance, reliability and operating life in the genotyping pipeline.
|
BURKERT111
20 October 2010
Bürkert has expanded its clean line, stainless steel ELEMENT range of products for total loop process control – hygienic or aggressive - with the launch of ELEMENT Neutrino analytical transmitters.
|
BURKERT105
17 September 2010
The cost-down pressures inherent in all process industries mean that plant operators are consistently required to improve efficiency, at the same time as ensuring repeatable product quality.
|
BURKERT106
27 August 2010
Burkert is maximising its ability to provide process solutions in key markets, such as pharmaceutical, oil and gas, food and beverage and semi-conductors, with the appointment of Fluid Controls - a specialist in these sectors, as its distributor for the South East of England.
|
BURKERT44
12 August 2010
Burkert has provided a complete process control system, including level and flow monitoring, fluid control and process actuation, for a new Moulding Station and Effluent Treatment plant, installed at Mersen’s new production facility at Eurocentral in Scotland.
|
BURKERT93
19 July 2010
Scaling, fouling and oxidation are the natural enemies of reverse osmosis (RO) systems in water processing units—especially in the food and pharmaceutical industries.
|
BURKERT99
05 July 2010
With the development of practical solutions that integrate automation functions into the pneumatic actuators of process valves, decentralised automation systems have become a real alternative to control cabinet systems in many process sectors.
|
BURKERT98
29 June 2010
The monitoring of the pH of liquid media in high- end hygienic processes - in biotechnology, pharmaceutical and food processing - ensures not only that legal requirements are met, but also that quality standards are maintained, reducing cost and ensuring optimum levels of yield.
|
BURKERT100
23 June 2010
Bürkert Fluid Control Systems has partnered with Green Fuels Ltd., the World’s leading biodiesel equipment manufacturer, providing a complete package of ATEX- rated valves, flow sensors, level switches, positioner systems and conductivity and flow meters, for Green Fuels’ latest Fuelmatic system.
|
BURKERT89
12 May 2010
Burkert’s ex-proof AirLINE Ex 8650 system, working in conjunction with modules from the intrinsically safe Siemens SIMATIC ET 200iSPTM system, has provided the ideal solution in a recent North Sea project for Jiskoot an internationally recognised manufacturer and supplier of Zone 1 control, sampling and blending systems to the oil and gas industry.
|
BURKERT97
19 April 2010
The cost-down pressures inherent in all process industries mean that plant operators are consistently required to improve efficiency, at the same time as ensuring repeatable product quality. In pursuit of efficiency, companies are prepared to invest heavily in new plant and equipment.
|
BURKERT84
12 April 2010
The ability of Burkert’s robotic welding cooling system to guarantee zero leakage in the event of welding cap loss has resulted in total adoption of the system on all welding plant at Magna System Chassis in France, which produces all chassis parts for MCC SMART, a daughter company of Daimler-Benz.
|
BURKERT91
24 February 2010
The integration of sensor, control electronics and proportional valves into a single compact device enables Burkert’s new Liquid Flow Controller (LFC) to provide fast and accurate measurement and dosage of small volumes of liquids with nominal flow rates of 10 – 600 ml/min (0.6 to 36 l/h) with a 1:10. measuring span.
|
BURKERT96
19 February 2010
Burkert’s innovative Type 6650 3/2 isolation valve uses patented flipper technology to set a new benchmark for miniature solenoid valves employed in clinical, life-science, analytical and fluid handling equipment.
|
BURKERT30
26 January 2010
Burkert is expanding both the range and the media types that can be measured using non -contact radar technology, with the launch of its Type 8136, 8137 and 8138 modular radar transmitters.
|
BURKERT85
11 January 2010
Burkert has taken a major step in advancing its control and monitoring business with the UK utilities sector, by becoming a fully registered member on the Achilles Utilities Vendor Database: UVDB supplier no 703175.
|
BURKERT72
25 November 2009
Burkert’s 8804 ATEX- rated electrically actuated ball valves are providing the safe shut off of heating oil and diesel fuels at multiple depots operated by one of the UK’s largest fuel distributors.
|
BURKERT82
19 November 2009
Burkert’s new 8792/8793 SideControl units are versatile, robust and easy- to- use positioners/process controllers designed for flexible mounting onto linear and rotary actuators, (according to IEC534-6/VDI/VDE 3845 Namur), and also Burkert process valves.
|
BURKERT81
12 November 2009
Intelligent cooling system detects fluid loss due to welding ‘tip off’, and automatically shuts off water, reducing contamination downtime and scrap.
|
BURKERT62
16 October 2009
Robolux valves replace traditional shut-off diaphragm valves
reducing system costs dramatically
|
BURKERT48
02 October 2009
Sterile filling units use only 2 Robolux units, where previously 8 traditional diaphragm valves were required.
|
BURKERT80
01 October 2009
Isolated miniature solenoid valves (IMSV) that provide maximum power from a minimum sized envelope are the current demand of original equipment manufacturers (OEMs) in the field of laboratory and analysis technology, and also medical engineering. In clinical diagnostics, flow-rate and reliability are essential, while cleanliness is given top priority.
|
BURKERT38
30 September 2009
The flexible, precise control provided by Burkert’s 2712 stainless steel globe valve and integrated 8630 Top Control positioner is delivering the ideal control solution on an engine coolant control system, part of a new engine test rig at BP Castrol’s Technology Centre in Berkshire.
|
BURKERT57
16 September 2009
Buck Systems, part of GEA Pharma Systems based in Birmingham UK is using Burkert to sub-contract supply pneumatic control systems for it’s leading edge powder processing plant equipment used in one of the world’s largest and most advanced tablet manufacturing plants in the Far East.
|
BURKERT66
26 August 2009
The ultra-fine control, accuracy and repeatability provided by Burkert’s CMOSens® mass flow controller technology (MFC) has been instrumental in enabling Plasma Surgical to develop PlasmaJet, the first and only true plasma surgery system for surgical cutting and coagulation.
|
BURKERT63
17 August 2009
Every day, new types of machines and equipment are being designed and developed that push forward the boundaries of medical science. In this continuing offensive, specialist MicroFluidic products for medical, biomedical and analytical applications
|
BURKERT77
10 August 2009
Bürkert and BBS-Systems AG of Switzerland have formed an alliance that offers combined competence and a single source for specific system solutions in the pharmaceutical, biotechnology, chemical- and food market sectors. The alliance provides a unique synergy of Burkert’s valve, sensor, process control, hazardous area and specialist products with BBS’s sterile range of ancillary piping, flanges, connectors, indicators, sampling systems and vessel equipment.
|
BURKERT79
06 August 2009
Bürkert UK has launched an exhibition stand with a difference - visitors don’t need to leave their desk in order to visit it. So no traffic queues to get in, no limit on opening times and no five mile trek from the car park.
|
BURKERT69
06 August 2009
Burkert Fluid Control Systems has launched the latest version of its mxControl multi-parameter controller. The microprocessor-based mxCONTROL system provides for general process and chemistry control in applications such as cooling towers, boilers and reverse osmosis plants.
|
BURKERT78
06 August 2009
Bürkert has launched its new hardback fluid control systems catalogue for 2009/2010. The catalogue features Bürkert’s wide range of control and sensing solutions for use across a broad base of applications; including the new Element modular system.
|
BURKERT12
05 August 2009
Bürkert Fluid Control Systems has worked with Green Fuels, a leading bio-diesel equipment manufacturer, to develop a distributed skid system for the commercial production of bio-diesel. As well as supplying a number of high-end fluid control devices, Bürkert provided system support and service throughout each phase of the development of the bio-diesel processor.
|