Jamaican patties remain a firm favourite, thanks to Burkert’s 10-year-lasting valves

02/10/2018 09:07:13
 
 
Download Press Release
English
ImagesClick Image for 300dpi jpg fileJamaican patties remain a firm favourite, thanks to Burkert’s 10-year-lasting valvesJamaican patties remain a firm favourite, thanks to Burkert’s 10-year-lasting valvesJamaican patties remain a firm favourite, thanks to Burkert’s 10-year-lasting valvesJamaican patties remain a firm favourite, thanks to Burkert’s 10-year-lasting valves

Incorporated 30 years ago in June this year, Cleone Foods produces Jamaican patties and distributes them under its Island Delight brand name. The company relies on it’s process equipment to ensure an uninterrupted supply of it’s tasty products and Burkert has proven itself up to the task with process valves that have been in operation for ten years before requiring a service.

Derived from the Cornish pasty, Jamaican patties can contain a range of fillings with a distinctive, spicy taste. The company, which is based in Birmingham, has expanded several times since its inception, including into bigger premises.

Wade Lyn, the founder and company director of Cleone Foods, created the company with a clear objective of creating a strong brand that delivered high quality products without compromise. This concept was also used in selecting the equipment used to manufacture the Jamaican patties and the reason behind choosing Burkert fluid control valves.

Wade says, “We have a passion for creating our products and quality matters a lot - not just for food industry regulatory standards but for the taste and the experience of our range, it has to be right.”

Maintaining productivity is very important in any industry, especially in the food and beverage sector, where downtime needs to be minimized wherever possible. Therefore, being able to replace components, such as control valves, in a matter of minutes ensures that production lines can continue operating with minimal delays.

For the past 10 years, Burkert Type 2000 flow control valves have been used to regulate the flow of steam and hot water to the cookers, in an area that has repeated wash-downs. The choice of control valve has delivered a decade of reliable service in an environment that would have caused lesser components to fall short.

More recently, the Type 2000 underwent a design update that, amongst other things, reduced the overall length of the fluidic module. Therefore, if a complete valve assembly was to be replaced, some additional work would be required to reposition the threaded joints to enable the new valve to be installed.

However, in this case, only the original valve stem and actuators were to be replaced, leaving the valve body in place. Fortunately, even though the Type 2000 has been updated, the new components are still compatible with the original valve bodies, minimising the downtime required to complete the job.

Pneumatically controlled valves have two ports, inlet and exhaust and in a humid atmosphere damp air can reduce the long-term reliability of the valve. When the valve closes a small amount of ambient air is drawn into the valve to fill the void. In certain circumstances it is advisable to install a silencer on the valve or to draw the air from a cleaner source, such as the inside of a control cabinet. So, when the local Burkert Sales Manager visited the production site he offered this advice on prolonging the service life of the new valves even further than the 10 years offered by the original components.

Having confirmed that the new valve stem and actuator would be a direct replacement for the current components, the job of exchanging them would only take about 15 minutes. If the valve body needed to be replaced this would take considerably longer, especially if the valves had been welded in place.

Greg Wainhouse, Account Manager for Burkert, explains: “Hygiene is of the utmost importance in the food and beverage industry so if any maintenance work requires a system pipeline to be opened then it must be cleaned properly before production can restart. In this case, replacing the valve stem and controller was a really simple operation and the customer now has all the benefits of the latest incarnation of the Type 2000 valve.”

Wade Lyn, Managing Director, concludes: “We have relied on the Burkert valves for many years now and they have certainly delivered in terms of service life. The new valve actuators were easy and quick to install and the advice we received from Burkert will help us to prolong their reliability even further.”

Image captions:

Image 1: Type 2000 flow control valves have been used to regulate the flow of steam and hot water to the cookers, in an area that has repeated wash-downs.

Image 2: Wade Lyn, founder and company director of Cleone Foods.

Image 3: Maintaining productivity is very important in the food and beverage sector, where downtime needs to be minimized wherever possible.

Image 4: The choice of control valve has delivered a decade of reliable service in an environment that would have caused lesser components to fall short.

About BURKERT

Burkert Fluid Control Systems is one of the leading manufacturers of control and measuring systems for fluids and gases. The products have a wide variety of applications and are used by breweries and laboratories as well as in medical engineering and space technology. The company employs over 2,500 people and has a comprehensive network of branches in 36 countries world-wide.

The image(s) distributed with this press release may only be used to accompany this copy, and are subject to copyright. Please contact DMA Europa if you wish to license the image for further use.

Editor Contact

DMA Europa Ltd. : Brittany Kennan
Tel: +44 (0)1562 751436 Fax: +44 (0)1562 748315
Web: www.dmaeuropa.com
Email: brittany@dmaeuropa.com

Company Contact

Bürkert Fluid Control Systems : Kirsty Anderson
Tel: +44 (0)1285 648761 Fax: +44 (0)1285 648721
Web: www.burkert.co.uk
Email: kirsty.anderson@burkert.com

 
  [ Back ]  
About the DMA Group Click to Read More